 DistroWatch Weekly |
| Tip Jar |
If you've enjoyed this week's issue of DistroWatch Weekly, please consider sending us a tip.
(Tips this week: 0, value: US$0.00) |
|
|
|
 bc1qxes3k2wq3uqzr074tkwwjmwfe63z70gwzfu4lx  lnurl1dp68gurn8ghj7ampd3kx2ar0veekzar0wd5xjtnrdakj7tnhv4kxctttdehhwm30d3h82unvwqhhxarpw3jkc7tzw4ex6cfexyfua2nr  86fA3qPTeQtNb2k1vLwEQaAp3XxkvvvXt69gSG5LGunXXikK9koPWZaRQgfFPBPWhMgXjPjccy9LA9xRFchPWQAnPvxh5Le paypal.me/distrowatchweekly • patreon.com/distrowatch |
|
| Extended Lifecycle Support by TuxCare |
|
|
| Reader Comments • Jump to last comment |
1 • IPV? (by DaveW on 2023-11-06 02:02:25 GMT from United States)
IPV4 and IPV6 are both set to automatic in my network manager. Does that mean they are both being used?
2 • Porteus should have been my top distro (by mnrv-ovrf-year-c on 2023-11-06 02:21:44 GMT from Puerto Rico)
I am chicken to use Slackware like the "brothers"... "Alienbob's" instructions on how to install "multilib" are too deep for me. I agree that "slapt-get" shouldn't be incorporated into the Slackware ISO for the next version, because I have had a few issues with it. But Porteu(s/X) could give me Wine with "multilib"! Otherwise, for my hobbyist sensibilities, I had to install Slackware 32-bit. It limits very much what I could use such as AppImages.
Porteus is precisely the distro I keep around to jump into a desktop to do stuff. Because all others I have are taking much longer than 30 seconds to boot, then let me log in and then even more time to show me the desktop. Porteus is a good plan for people who dislike upgrading and are satisfied with what they have on their limited equipment. It's good for me once I cannot have my own paid Internet any further. To follow Slackware "current" it is advised to go with PorteuX. That one should be updated more frequently.
I really wanted to go further checking out the mutation called Nemesis, which is based on Arch Linux instead.
3 • IP6 (by Jan on 2023-11-06 02:27:33 GMT from Netherlands)
According to an explanation at PCLinuxOS, enabled IP6 causes a slow down of the PC-system.
If you open the Network Manager Application in PCLinuxOS you can set an IP4 DNS (for instance from a DNS provider with malware protection), but setting IP6 DNS is disabled.
4 • IP6/IP4 setting @3 (by Jan on 2023-11-06 02:33:44 GMT from Netherlands)
If you change the IP4/IP6 DNS, you have to open ¨Method¨ and choose the item with ¨Adresses¨
5 • @1 (by Head_on_a_Stick on 2023-11-06 06:08:59 GMT from United Kingdom)
Check with:
ip -6 a
^ That will show any active IPv6 connections.
See https://wiki.archlinux.org/title/IPv6#Disable_IPv6 for distibtion-agnostic instructions that don't presume NetworkManager is in use.
6 • IPV4 and IPV6 (by Romane on 2023-11-06 08:26:03 GMT from Australia)
My network is all IPV4. The main reason is that I find the IPV4 syntax familiar and simple, while that for IPV6 is, to put it simply, just too complicated (for all its advantages and reason for existence).
That, and my service provider only provides me with IPV4 - my plan does not include IPV6, though my router is capable. I am happy with that situation for the same reasons given for my network in the paragraph above.
7 • Porsteus package management (by Otis on 2023-11-06 11:23:23 GMT from United States)
They want a temp file removed: /tmp/.ppmlock to address one of the package management issues.
Worked for me after a restart.
8 • Do you use IPv4 or IPv6? (by James on 2023-11-06 12:31:54 GMT from United States)
I believe I use IPv4 as it is the default.
I would have no idea how to switch that too IPv6. Though like @1 said, it is set to automatic. I recognize the IPv4 IP address, but do not recognize the IPv6 IP address. It has never showed up when I have done an online or terminal IP check.
9 • IPv4 vs IPv6 (by Some Random User on 2023-11-06 13:13:20 GMT from United States)
@6 As long as you are not the DNS server or use an app/service that requires you to type in the IP Address, just use the domain name.
10 • Distro "Proprietary" Software (by John Lamb on 2023-11-06 17:35:52 GMT from United States)
My hobby/passion is meteorology. There is one radar display app that is free (but is an electron app) for Linux.
However, the Advanced Weather Interactive Processing System (AWIPS) of the US National Weather Service is also available for use by the general public. There is a cloud data feed of all the information necessary to use it and the only feature missing is the ability to "send" warnings out for obvious reasons.
However, it was developed solely for RHEL 7.x but is set to move to RHEL 8.x with the new v20 release coming soon (tm). As it was a government contract, the developers (Raytheon Corp) had one OS to build for and support so that's all there is. I've never seen any attempts to port it to a more general Linux environment.
As an Artix user, I have two choices: a VM (performance and graphics hit) or a separate machine to dedicate to it. Both are lousy options to be honest, yet, I'm looking at the dedicated machine for it.
I've been tempted to install FreeBSD and see if the Linuxulator will run it but that's just another layer of PITA I don't want to resolve and maintain.
11 • IPv6 (by mehdi on 2023-11-06 19:22:21 GMT from Algeria)
IPv6 is not available in my country (Algeria)
We don't have a choice.
12 • IPv6 (by Vukota on 2023-11-07 07:18:26 GMT from Serbia)
It is just too much hassle to chase down issues when things gets routed wrong way, and/or something doesn't work or is not configured right for IPv6. IPv4 is easy to type and understand, IPv6, not so, and with mix it gets really complicated. I explicitly disable IPv6 on all devices I have control of, even the ones I do not fully control, I have a script to disable all IPv6 configs in order to avoid headaches that pops out after updates, unless I disable v6 end to end.
13 • IPv6 (from Brazil) (by Douglas Silva on 2023-11-07 17:46:52 GMT from Brazil)
The only complication comes from my ISP - they don't give me a static prefix. That results in unpredictable global-unicast addresses with the default address generation method (stable-privacy). To work around this I use the "eui-64" method, which generates the interface identifier based on its MAC.
And in the OpenWrt router firewall I have to use a wildcard-like (or mask) address to refer to a specific device:
::d7a6:3dff:fa9c:b7da/::ffff:ffff:ffff:ffff
I think it's about time we moved away from IPv4. It's ridiculous how long it's taking. It sure takes a lot of effort to learn how IPv6 works, but it's very interesting and powerful to know. Not many people know it, not many people care - and that's more of a reason to try it, because we need it.
14 • IPv6 (from Brazil) - complementing (by Douglas Silva on 2023-11-07 18:04:43 GMT from Brazil)
The unstable prefix given by my ISP interferes with the default interface identifier generation method, and produces ever-changing global-unicast and ULAs (Unique Local Addresses).
Them bastards charge me for a static public ipv4, and can't give me a static ipv6. I don't know if it's a technical limitation or they're just unqualified to configure it. I'm sure it wouldn't cost them anything, as ipv6 addresses are abundant.
15 • Disabling ipv6 via grub (by Bashful Banana on 2023-11-08 02:36:55 GMT from Netherlands)
Easily disable ipv6 by adding this to your grub boot line options:
ipv6.disable=1
One and done!
16 • ipv6? ugh (by Will on 2023-11-09 01:18:43 GMT from United States)
Ha, IPv6 sucks and it's pretty worthless. Unless you are the IT guy who has to implement it, it serves no purpose for general computing (IOT is a different story). First thing I do on a new device on my network is disable it completely, the speedup on resolution alone is worth it.
17 • Trying linux installers (by Jan on 2023-11-09 17:05:09 GMT from Netherlands)
I have tried to install different popular linuxes from USB-sticks.
I am using an old notebook with defect display, connected to an external monitor, the BIOS ordered to connect to this external monitor.
Generally the installers almost all did not detect the external monitor. They used the (defect) notebook display. This gave on the external monitor a background but without any essential icon.
I used safe-video or compatibily mode or safe mode (or whatever trick), in the hope that after install the booted linux would detect the second monitor, at which I could set the correct monitor to use.. Mint (if I remember well) plopped up a window at right-click which contained an option to go to Display-Settings (very convinient).
This worked at a few linuxes (Mint, PCLinuxOS). However at some installed distros I was unable to get my preferred monitor, making the installed distro unusable (a.o. Fedora 39 Mate).
I find this nuissance, unable to detect/go to an external monitor, remarkable. With GParted and Window-install media I have never had this problem.
So if GParted is able to come to my external monitor in the correct way, or at the install-screen there is a way to go to Display-Settings (Mint), why do a lot of linux -installers fail at this point?
By the way: Mint-Cinnamon was very slow, Mint-Mate was better but still slow, Mint-XFCE had weird problems, Linux-MX was also a little slow, PCLinuxOS was fairly perfect (and with everything working). And Fedora-Mate seemed to be not irritating slow and interesting to use (a.o. because of the solid backing of the disto), but was unusable because of the failed correct monitor detection.
18 • @17 • Trying linux installers (by Jan on 2023-11-09 17:11:02 GMT from Netherlands)
PCLinux in the version MATE. The PCLinuxOS-KDE installer did also not boot, it stalled.
19 • Speed (by Friar Tux on 2023-11-10 00:03:25 GMT from Canada)
@17 - @18 (Jan) And here I am with just the opposite issue. My Mint/Cinnamon is quite fast, while The Wife's Mint/Mate is slow as molasses in January. (She refuses to change as she doesn't really care about the speed at her age.) We have the same HP Pavilion model laptops.
20 • @17 Trying Linux Installers (by AdrienM on 2023-11-10 02:14:48 GMT from United States)
Can you provide some specs on your machine? I've found many 'modern' Linux distros to perform like syrup on most hardware older than 10+ years that is otherwise entirely functional. (internal monitor not withstanding) There are exceptions of course.
While a modern distro may end up being suitably snappy and recognize your external display with little difficulty, you may also be relegated to an older version/kernel.
For example, something like ClassicPup is super fast on even a 20+ year old machine as it runs in RAM. (though HDD installation is possible)
For a more modern version, I've successfully used Q4OS Trinity version on an ancient 32bit tower that made it speedy like the Road Runner. I'm sure it never ran Win95 that fast for sure.
I've tested both with external monitors, though not with the external as primary, sorry. There may be a way in your BIOS to default to the external, though you may have to step through those keys blind with lots of research to make it work. (only once though) You might get lucky as even some old laptops have a key combo to enable an external monitor and you might at least mirror the main display once in the BIOS.
As for Desktop Environments, depending on your hardware specs, you might be better with one of the super light-weight options like LxQT, LXDE, or some lesser used variants (like what Puppy uses) JimsWM, etc.
Another option is to investigate eschewing a full-bloated 'DE' for a simple window manager and login-manager pairing. Check out Openbox and Fluxbox, or if you are really adventurous and text oriented: i3. You can then add-in missing functionality one app at a time until you get too slow for your tastes, then decide on the trade-off costs for each convenient app.
And on that final note, check out Bunsen Labs which uses Openbox. It should be relatively snappy on older hardware and you might get lucky with the external display issue.
21 • IPv6 (by Adrienm on 2023-11-10 02:17:07 GMT from United States)
I disable IPv6 as a matter of course on all new installs now since I invariably have to do it at some point anyway.
Networking *always* gets mucked up at some point with it enabled and disabling magically solves the problem.
I'm not sure what the problem is across multiple machines, interfaces, or ISPs, but I'm simply not in the mood to figure it out when I can just turn it off and do work.
22 • @19 Mint/MATE vs. Mint/Cinnamon (by AdrienM on 2023-11-10 02:28:22 GMT from United States)
I've tested these a few times, both in a Vbox VM and on bare metal. (same version for each DE for several trials)
My conclusion is that MATE is simply slower than Cinnamon. (and, if I recall correctly, more memory hungry) I only started this in the last few years, so maybe that wasn't the case early on, but it has held fairly consistently.
MATE is old tech - based on Gnome 2.x. Cinnamon is modern Gnome made to remotely resemble Gnome 2.x visually. (or even exactly if you like, I think)
It seems few if any speed improvements either have made it to MATE, or else, they simply aren't possible with that old codebase.
I always viewed MATE as a transition DE until Cinnamon could be fully featured, but it seems to have stuck around past its originally conceived end-of-life. More power to it, but I see no compelling reason to ever use it. (But if you already are and are happy with it, there's not really a reason to change it either)
23 • Speed @17+@18+@19 Trying linux installers (by Jan on 2023-11-10 02:23:23 GMT from The Netherlands)
I judged the speed of the tested linux installs by looking if in the Firefox browser smooth scrolling is possible (in Chrome-based browsers at old hardware smooth scrolling seems impossible).
Of course also starting/stopping/running programs should not be slow/lagging, but at this OK, bad smooth scrolling in the browser proved possible, so the better test.
I hate jumpy scrolling/moving (also lagging of the mouse pointer).
PS: The hardware on which I tested this was a Lenovo X200 (P8400) with 8GB RAM and an 250 GB SSD, so an old processor but enough memory and fast disk drive.
This is the weakest PC I have. If I can find a good working linux (with a solid backing/continuity) on this , I can make any of my PC's good working with linux (preparing w.r.t. the demise of Win10).
24 • @23 - Trying Linux Installers (by AdrienM on 2023-11-10 02:49:40 GMT from United States)
Wow, that's an otherwise capable laptop with a seriously hobbled processor. (I'm guessing for thermal/power/price-point reasons)
You should still be able to find a reasonably modern distro to run on it with acceptable latency.
If you get tired distro hopping, consider going back to a distro you prefer, but trying a different scheduler. There are some which might considerably reduce system latency.
Also, Firefox at least has a 'smooth scrolling' feature which depending on version, may not be enabled out of the box. You'll find it in settings. Sometimes, enabling hardware acceleration improves this, sometimes it hampers it, at least that has been my experience.
Some external wireless mice introduce considerable latency compared to an internal trackpad, or wired mouse. I've experienced a few models/brands that are practically unusable. When working one someone else's machine, I always remove the dongle to pep things up and just use the trackpad.
25 • Speed + Testing installers/linux @ AdrienM (by Jan on 2023-11-10 05:09:23 GMT from The Netherlands)
AdrienM
Thanks for your interesting advises.
I was indeed getting tired of distro-installer-hopping. Of each 3 installer-start-ups I think 2 failed (for my hardware situation). It is good possible that I have had 30-40 try outs in 2 weeks.
As mentioned earlier, PCLinuxOS-Mate was the only distro which succeeded to install and behaved OK.
Puppy and Q4OS and LxQT/LXDE are on my waiting list.
And I hope the distro-suppliers try to copy in their installer the way GParted is able to start without any problem.
26 • Speed and distro installers (by Ennio on 2023-11-10 15:10:57 GMT from The Netherlands)
Frankly it's a 2/3 years that an installation goes not grinding on some kind of hardware. After leaving Realtek stuff behind cannot remember issues, including external monitors (still having nightmares about that MKLinux install on Apple's LC models...). About speeds assorted, now that KDE is surprisingly less sluggish - and leaving my preventions behind - I would also use it. If you consider Q4OS the |Trinity version is surely springier than the KDE one, but not so much, and maybe I do not care anymore since now more than 4 GB is standard. Before, it was the classic trimming out, choosing partitions and filesystems ad libitum. Memory lane about speed is a couple of years old, so doesn't count. Now I am using WMaker Debian for the lulz, and my perception is biased. Anyway, if MX XFCE is the Ford Capri then, say, Mageia is like a sedan thus I wouldn't expect snippy performances, so is Deepin etc.
Please everyone consider using the excellent Ventoy system, the guy responsible for it, longpanda, is doing a very good job and the forum is not neglected at all.
PS If not incorrect, I remember that it was OpenSuse the first to lift the rock on KDE speed and memory usage, as Jesse noted in his review .
27 • @26 USB-linux installer Ventoy (by Jan on 2023-11-10 16:52:42 GMT from The Netherlands)
Initially I used Rufus to make USB-lunux-installers. For Fedora this however failed, at USB-booting an error occured.
Then for Fedora I used their Fedora USB maker, it worked. However after a few time using this installer the USB-stick had a problem, because of which it seemed unusable anymore (I succeeded in repairing this). This was not the first distro which seemed to make a USB-stick unusable for other things.
I then went for Ventoy, this was a succes. Only do not leave the stick in the PC at rebooting, The reboot (Windows) appears to hang. Boot with a Ventoy-stick from a PC which was off.
Number of Comments: 27
Display mode: DWW Only • Comments Only • Both DWW and Comments
| | |
| TUXEDO |
TUXEDO Computers - Linux Hardware in a tailor made suite
Choose from a wide range of laptops and PCs in various sizes and shapes at TUXEDOComputers.com. Every machine comes pre-installed and ready-to-run with Linux. Full 24 months of warranty and lifetime support included!
Learn more about our full service package and all benefits from buying at TUXEDO.
|
| Archives |
| • Issue 1091 (2024-10-07): Redox OS 0.9.0, Unified package management vs universal package formats, Redox begins RISC-V port, Mint polishes interface, Qubes certifies new laptop |
| • Issue 1090 (2024-09-30): Rhino Linux 2024.2, commercial distros with alternative desktops, Valve seeks to improve Wayland performance, HardenedBSD parterns with Protectli, Tails merges with Tor Project, Quantum Leap partners with the FreeBSD Foundation |
| • Issue 1089 (2024-09-23): Expirion 6.0, openKylin 2.0, managing configuration files, the future of Linux development, fixing bugs in Haiku, Slackware packages dracut |
| • Issue 1088 (2024-09-16): PorteuX 1.6, migrating from Windows 10 to which Linux distro, making NetBSD immutable, AlmaLinux offers hardware certification, Mint updates old APT tools |
| • Issue 1087 (2024-09-09): COSMIC desktop, running cron jobs at variable times, UBports highlights new apps, HardenedBSD offers work around for FreeBSD change, Debian considers how to cull old packages, systemd ported to musl |
| • Issue 1086 (2024-09-02): Vanilla OS 2, command line tips for simple tasks, FreeBSD receives investment from STF, openSUSE Tumbleweed update can break network connections, Debian refreshes media |
| • Issue 1085 (2024-08-26): Nobara 40, OpenMandriva 24.07 "ROME", distros which include source code, FreeBSD publishes quarterly report, Microsoft updates breaks Linux in dual-boot environments |
| • Issue 1084 (2024-08-19): Liya 2.0, dual boot with encryption, Haiku introduces performance improvements, Gentoo dropping IA-64, Redcore merges major upgrade |
| • Issue 1083 (2024-08-12): TrueNAS 24.04.2 "SCALE", Linux distros for smartphones, Redox OS introduces web server, PipeWire exposes battery drain on Linux, Canonical updates kernel version policy |
| • Issue 1082 (2024-08-05): Linux Mint 22, taking snapshots of UFS on FreeBSD, openSUSE updates Tumbleweed and Aeon, Debian creates Tiny QA Tasks, Manjaro testing immutable images |
| • Issue 1081 (2024-07-29): SysLinuxOS 12.4, OpenBSD gain hardware acceleration, Slackware changes kernel naming, Mint publishes upgrade instructions |
| • Issue 1080 (2024-07-22): Running GNU/Linux on Android with Andronix, protecting network services, Solus dropping AppArmor and Snap, openSUSE Aeon Desktop gaining full disk encryption, SUSE asks openSUSE to change its branding |
| • Issue 1079 (2024-07-15): Ubuntu Core 24, hiding files on Linux, Fedora dropping X11 packages on Workstation, Red Hat phasing out GRUB, new OpenSSH vulnerability, FreeBSD speeds up release cycle, UBports testing new first-run wizard |
| • Issue 1078 (2024-07-08): Changing init software, server machines running desktop environments, OpenSSH vulnerability patched, Peppermint launches new edition, HardenedBSD updates ports |
| • Issue 1077 (2024-07-01): The Unity and Lomiri interfaces, different distros for different tasks, Ubuntu plans to run Wayland on NVIDIA cards, openSUSE updates Leap Micro, Debian releases refreshed media, UBports gaining contact synchronisation, FreeDOS celebrates its 30th anniversary |
| • Issue 1076 (2024-06-24): openSUSE 15.6, what makes Linux unique, SUSE Liberty Linux to support CentOS Linux 7, SLE receives 19 years of support, openSUSE testing Leap Micro edition |
| • Issue 1075 (2024-06-17): Redox OS, X11 and Wayland on the BSDs, AlmaLinux releases Pi build, Canonical announces RISC-V laptop with Ubuntu, key changes in systemd |
| • Issue 1074 (2024-06-10): Endless OS 6.0.0, distros with init diversity, Mint to filter unverified Flatpaks, Debian adds systemd-boot options, Redox adopts COSMIC desktop, OpenSSH gains new security features |
| • Issue 1073 (2024-06-03): LXQt 2.0.0, an overview of Linux desktop environments, Canonical partners with Milk-V, openSUSE introduces new features in Aeon Desktop, Fedora mirrors see rise in traffic, Wayland adds OpenBSD support |
| • Issue 1072 (2024-05-27): Manjaro 24.0, comparing init software, OpenBSD ports Plasma 6, Arch community debates mirror requirements, ThinOS to upgrade its FreeBSD core |
| • Issue 1071 (2024-05-20): Archcraft 2024.04.06, common command line mistakes, ReactOS imports WINE improvements, Haiku makes adjusting themes easier, NetBSD takes a stand against code generated by chatbots |
| • Issue 1070 (2024-05-13): Damn Small Linux 2024, hiding kernel messages during boot, Red Hat offers AI edition, new web browser for UBports, Fedora Asahi Remix 40 released, Qubes extends support for version 4.1 |
| • Issue 1069 (2024-05-06): Ubuntu 24.04, installing packages in alternative locations, systemd creates sudo alternative, Mint encourages XApps collaboration, FreeBSD publishes quarterly update |
| • Issue 1068 (2024-04-29): Fedora 40, transforming one distro into another, Debian elects new Project Leader, Red Hat extends support cycle, Emmabuntus adds accessibility features, Canonical's new security features |
| • Issue 1067 (2024-04-22): LocalSend for transferring files, detecting supported CPU architecure levels, new visual design for APT, Fedora and openSUSE working on reproducible builds, LXQt released, AlmaLinux re-adds hardware support |
| • Issue 1066 (2024-04-15): Fun projects to do with the Raspberry Pi and PinePhone, installing new software on fixed-release distributions, improving GNOME Terminal performance, Mint testing new repository mirrors, Gentoo becomes a Software In the Public Interest project |
| • Issue 1065 (2024-04-08): Dr.Parted Live 24.03, answering questions about the xz exploit, Linux Mint to ship HWE kernel, AlmaLinux patches flaw ahead of upstream Red Hat, Calculate changes release model |
| • Issue 1064 (2024-04-01): NixOS 23.11, the status of Hurd, liblzma compromised upstream, FreeBSD Foundation focuses on improving wireless networking, Ubuntu Pro offers 12 years of support |
| • Issue 1063 (2024-03-25): Redcore Linux 2401, how slowly can a rolling release update, Debian starts new Project Leader election, Red Hat creating new NVIDIA driver, Snap store hit with more malware |
| • Issue 1062 (2024-03-18): KDE neon 20240304, changing file permissions, Canonical turns 20, Pop!_OS creates new software centre, openSUSE packages Plasma 6 |
| • Issue 1061 (2024-03-11): Using a PinePhone as a workstation, restarting background services on a schedule, NixBSD ports Nix to FreeBSD, Fedora packaging COSMIC, postmarketOS to adopt systemd, Linux Mint replacing HexChat |
| • Issue 1060 (2024-03-04): AV Linux MX-23.1, bootstrapping a network connection, key OpenBSD features, Qubes certifies new hardware, LXQt and Plasma migrate to Qt 6 |
| • Issue 1059 (2024-02-26): Warp Terminal, navigating manual pages, malware found in the Snap store, Red Hat considering CPU requirement update, UBports organizes ongoing work |
| • Issue 1058 (2024-02-19): Drauger OS 7.6, how much disk space to allocate, System76 prepares to launch COSMIC desktop, UBports changes its version scheme, TrueNAS to offer faster deduplication |
| • Issue 1057 (2024-02-12): Adelie Linux 1.0 Beta, rolling release vs fixed for a smoother experience, Debian working on 2038 bug, elementary OS to split applications from base system updates, Fedora announces Atomic Desktops |
| • Issue 1056 (2024-02-05): wattOS R13, the various write speeds of ISO writing tools, DSL returns, Mint faces Wayland challenges, HardenedBSD blocks foreign USB devices, Gentoo publishes new repository, Linux distros patch glibc flaw |
| • Issue 1055 (2024-01-29): CNIX OS 231204, distributions patching packages the most, Gentoo team presents ongoing work, UBports introduces connectivity and battery improvements, interview with Haiku developer |
| • Issue 1054 (2024-01-22): Solus 4.5, comparing dd and cp when writing ISO files, openSUSE plans new major Leap version, XeroLinux shutting down, HardenedBSD changes its build schedule |
| • Issue 1053 (2024-01-15): Linux AI voice assistants, some distributions running hotter than others, UBports talks about coming changes, Qubes certifies StarBook laptops, Asahi Linux improves energy savings |
| • Issue 1052 (2024-01-08): OpenMandriva Lx 5.0, keeping shell commands running when theterminal closes, Mint upgrades Edge kernel, Vanilla OS plans big changes, Canonical working to make Snap more cross-platform |
| • Issue 1051 (2024-01-01): Favourite distros of 2023, reloading shell settings, Asahi Linux releases Fedora remix, Gentoo offers binary packages, openSUSE provides full disk encryption |
| • Issue 1050 (2023-12-18): rlxos 2023.11, renaming files and opening terminal windows in specific directories, TrueNAS publishes ZFS fixes, Debian publishes delayed install media, Haiku polishes desktop experience |
| • Issue 1049 (2023-12-11): Lernstick 12, alternatives to WINE, openSUSE updates its branding, Mint unveils new features, Lubuntu team plans for 24.04 |
| • Issue 1048 (2023-12-04): openSUSE MicroOS, the transition from X11 to Wayland, Red Hat phasing out X11 packages, UBports making mobile development easier |
| • Issue 1047 (2023-11-27): GhostBSD 23.10.1, Why Linux uses swap when memory is free, Ubuntu Budgie may benefit from Wayland work in Xfce, early issues with FreeBSD 14.0 |
| • Issue 1046 (2023-11-20): Slackel 7.7 "Openbox", restricting CPU usage, Haiku improves font handling and software centre performance, Canonical launches MicroCloud |
| • Issue 1045 (2023-11-13): Fedora 39, how to trust software packages, ReactOS booting with UEFI, elementary OS plans to default to Wayland, Mir gaining ability to split work across video cards |
| • Issue 1044 (2023-11-06): Porteus 5.01, disabling IPv6, applications unique to a Linux distro, Linux merges bcachefs, OpenELA makes source packages available |
| • Issue 1043 (2023-10-30): Murena Two with privacy switches, where old files go when packages are updated, UBports on Volla phones, Mint testing Cinnamon on Wayland, Peppermint releases ARM build |
| • Issue 1042 (2023-10-23): Ubuntu Cinnamon compared with Linux Mint, extending battery life on Linux, Debian resumes /usr merge, Canonical publishes fixed install media |
| • Issue 1041 (2023-10-16): FydeOS 17.0, Dr.Parted 23.09, changing UIDs, Fedora partners with Slimbook, GNOME phasing out X11 sessions, Ubuntu revokes 23.10 install media |
| • Issue 1040 (2023-10-09): CROWZ 5.0, changing the location of default directories, Linux Mint updates its Edge edition, Murena crowdfunding new privacy phone, Debian publishes new install media |
| • Issue 1039 (2023-10-02): Zenwalk Current, finding the duration of media files, Peppermint OS tries out new edition, COSMIC gains new features, Canonical reports on security incident in Snap store |
| • Issue 1038 (2023-09-25): Mageia 9, trouble-shooting launchers, running desktop Linux in the cloud, New documentation for Nix, Linux phasing out ReiserFS, GNU celebrates 40 years |
| • Issue 1037 (2023-09-18): Bodhi Linux 7.0.0, finding specific distros and unified package managemnt, Zevenet replaced by two new forks, openSUSE introduces Slowroll branch, Fedora considering dropping Plasma X11 session |
| • Full list of all issues |
| Star Labs |
Star Labs - Laptops built for Linux.
View our range including the highly anticipated StarFighter. Available with coreboot open-source firmware and a choice of Ubuntu, elementary, Manjaro and more. Visit Star Labs for information, to buy and get support.
|
| Random Distribution | 
BlackArch Linux
BlackArch Linux is an Arch Linux-based distribution designed for penetration testers and security researchers. It is supplied as a live DVD image that comes with several lightweight window managers, including Fluxbox, Openbox, Awesome and spectrwm. It ships with over a thousand specialist tools for penetration testing and forensic analysis.
Status: Active
|
| TUXEDO |
TUXEDO Computers - Linux Hardware in a tailor made suite
Choose from a wide range of laptops and PCs in various sizes and shapes at TUXEDOComputers.com. Every machine comes pre-installed and ready-to-run with Linux. Full 24 months of warranty and lifetime support included!
Learn more about our full service package and all benefits from buying at TUXEDO.
|
| Star Labs |
Star Labs - Laptops built for Linux.
View our range including the highly anticipated StarFighter. Available with coreboot open-source firmware and a choice of Ubuntu, elementary, Manjaro and more. Visit Star Labs for information, to buy and get support.
|
|
• 
• 
• 
• 
• 
• 
• 
0x969CD4E778C7b6549A2B00e34114e0168c86A542 
