| DistroWatch Weekly
|DistroWatch Weekly, Issue 401, 18 April 2011
Welcome to this year's 16th issue of DistroWatch Weekly! Puppy Linux has emerged as the most popular among the lighter distributions available on the market. Its most recent release continues the distro's proud tradition of being super-fast even on modest hardware, while, at the same time, it also re-ignites the debate on running standard desktop application in the superuser mode. In this week's feature article Robert Storey weighs the pros and cons of Puppy Linux 5.2.5 and adds a few tips and tricks for good measure. In the news section, Stefano Zacchiroli is re-elected as Debian Project Leader, HatStacks offers a new web-based software portal for Fedora users, and the developer of Incognito Live System explains the reasons for the "untrusted website" message some visitors were getting while accessing the project's download page. Last but not least, a step-by-step instruction for compiling a vanilla Linux kernel and adding it to your distribution's bootloader menu. Happy reading!
Listen to the Podcast edition of this week's DistroWatch Weekly in OGG (38MB) and MP3 (34MB) formats
Join us at irc.freenode.net #distrowatch
|Feature Story (by Robert Storey)
Puppy Linux 5.2.5 - taking a bite out of bloat|
Dogs never bite me. Just humans. (Marilyn Monroe)
* * * * *
Puppy Linux - the brainchild of Australian developer Barry Kauler - first made its appearance in 2006 and quickly became known for its snappy speed and cutesy appearance. I assume that Barry likes dogs.
Currently, there are three renditions of this OS bearing the name "Puppy:" Wary, Quirky, and Lucid. Wary is designed to run on older hardware boasting museum-piece video cards and analog dial-up modems. Thus, it is "wary" of new hardware. Quirky is almost the exact opposite, where Barry and friends are experimenting with some new "quirky" ideas. And finally there is Lucid, the top dog, which is attempting to bring Puppy into the realm of competing desktop distros but without the bloat.
Another variation on the theme is Pupeee, a fork which was optimized for the diminutive hardware of the early ASUS eeePC netbooks. Those early netbooks (I have one) had wimpy specs (Intel Celeron-M processor at 900 MHz, 512 MB RAM, no hard drive). More recent models boast beefier specs and seem to work well with Lucid, which has diminished the need for Pupeee.
Today I'll be taking a look at Puppy Linux 5.2.5 Lucid, which was released on 2011-04-03. I'm testing it with a 4-year-old Dell Inspiron laptop featuring an Intel dual-core CPU running at 1.5 GHz with 2 GB of RAM and 80 GB hard drive. This is my main workhorse machine, and has Ubuntu 10.10 installed. Aside from having the fun of testing Puppy, this was a serious experiment to see if there were enough new features in this latest Puppy release to tempt me away from Ubuntu.
The Puppy 5.2.5 ISO file occupies a mere 128 MB, which means it will easily fit even on an 8-cm mini-CD. Though you can run it as a live CD, you'll get more functionality by installing it. However, even as a live CD, Puppy runs very fast because the whole operating system can fit into RAM. This is in sharp contrast to most other live distros, which run very slowly as the CD drive thrashes looking for data. It's popular to install Puppy on a USB memory stick and thus have a convenient OS-to-go, but for this review I'm installing on a spare partition of my hard drive.
One of the great features of Puppy is just how fast it installs. A bloated distro can take up to an hour before the first boot, but a typical Puppy installation session occupies less than 10 minutes. However, if you've never installed Puppy before, you might need several tries because there are a few opportunities to mess things up.
One thing that confuses a lot of punters is that at some point you'll be asked where the Puppy files reside (CD or Directory), and if you click on "CD" you'll get an error message. That's because the CD must be mounted before you even start the installation program. In Puppy, you mount CDs, memory sticks and drive partitions simply by clicking on their icons, which appear on the lower-left corner of the desktop.
Puppy Linux 5.2.5 - mount the CD before starting the install process
A second issue that can trip-up even veteran Puppy users is a question about "alternative MBRs." In most cases, "default" will work, but in the past I had to use one of the options to make Puppy boot on a USB stick. If your Puppy appears stillborn, you'll need to run through the whole installation procedure again and try one of the four options - if that doesn't work, go through it again and try the next option. In the one case where I had to do this, mbr.bin was what finally worked.
Puppy Linux 5.2.5 - selecting from bootloader options
One more hurdle on the path to Puppyhood is that you're given an opportunity to use the pfix=copy option, which allows file lupu_525.sfs to be copied into RAM at boot-up. I chose not to do this, but feel free to be different. This option can be altered at any time after installation. Another option is whether or not you wish to do a "frugal" or "full" install. If you're installing on a hard drive, I'd suggest "full."
Puppy Linux 5.2.5 - it is possible to run the whole Puppy from RAM
After you've done all the above and the installer works its magic, you might think you are done. However, don't remove the Puppy CD from the drive and reboot just yet. You've also got to install GRUB, or else you won't have a bootable system. In the menus, find "System --> GRUB bootloader config" - you'll be given the option of "simple" or "expert," and I suggest you keep it simple. You'll first be presented with an opportunity to configure GRUB to use the framebuffer (and thus create a pretty boot menu), but in line with my KISS (Keep It Simple Stupid) philosophy, I took the first option, "standard."
By the way, kudos to the developers of Puppy Linux for using supposedly "out-of-date" GRUB 1.x, rather than the "modern" but far messier GRUB 2. This is one case where the good old days were really better. I've never understood the logic behind GRUB 2 - it appears to be a solution in search of a problem. Anyway, next you'll be asked where you want the GRUB files to go. The obvious answer should be the same partition where you're installing Puppy. One suggestion I'd like to make to the developers: change your example from "/dev/hda2" to "/dev/sda2."
Puppy Linux 5.2.5 - installing GRUB
Finally, but crucially, you are asked to select the "GRUB destination." You're presented with three options, and it's a bit of a trick question. The first option offered, "Root," will only work if you're using a boot manager such as GAG. In fact, this is what I do, and I highly recommend GAG if you've got more than one operating system installed on your hard drive. However, the vast majority of users will probably choose option 3, the "MBR" even though you're warned that it's "possibly unsafe." Most odd is option 2, installing to a floppy. I know that Puppy likes to support old hardware, but I'm not sure it's still possible to even buy floppy disks. At least it's reassuring to know that Puppy does not support cassette-tape drives.
Puppy Linux 5.2.5 - choosing the bootloader location
If you do screw up the GRUB installation, the good news is that you don't have to reinstall everything. Just boot the live CD again and go through the GRUB configuration procedure. Compared to most distros, reconfiguring Puppy's GRUB is simplicity itself.
Having successfully survived the pitfalls of installation, I booted-up. Like everything else about Puppy, boot time was fast. The desktop is very cheerful with lots of artistic icons. Clicking on any icons or menus brings such an immediate response that you could be forgiven for thinking you're running a mainframe rather than a lowly PC. The instant response time is one of the greatest joys of the Puppy desktop.
Puppy Linux 5.2.5 - the default desktop
(full image size: 995kB, resolution 1280x800 pixels)
After admiring the aesthetics, my next mission was to get online, and actually this proved to be more traumatic than I expected. Outside of exploiting the occasional free WiFi spot, my connection to the Internet is almost exclusively via a 3G USB broadband modem. I clicked through the menus and found "Setup --> Internet Connection Wizard" and chose "Internet by dialup analog or wireless modem." While attempting to click my way through the configuration, Puppy suddenly froze on me. The screen was locked, the cursor wouldn't move, and even CTRL-ALT-Backspace wouldn't get me out of this mess. I finally had to do a brute-force reboot by pulling the power cord and removing the laptop's battery.
Unfortunately, this led to more problems. Puppy does not recover gracefully from hard crashes, even though I installed it with the robust ext4 file system. On attempting to boot, I was informed that Puppy had not shut down properly. It did finally boot, but only to a text-mode command prompt. An error message gave me the impression that I needed to run the "fsck" command as root. However, running fsck on a mounted partition is generally disastrous. Thankfully, fsck helpfully informs you of this fact if you attempt to launch it and gives you an opportunity to back out. The proper thing to do at this point was to reboot the computer with either the Puppy live CD or else my Ubuntu installation. Then, since I had Puppy installed on /dev/sda3, as root I ran this command:
I was informed by fsck that it had successfully recovered the journal and that everything was now peachy swell. I rebooted again, and this time I reached the command prompt with no visible error messages. Graphics did not start, however, until I typed "startx" and hit enter. Fortunately, that returned me to the Puppy desktop, and nothing seemed to have been permanently mangled. Nevertheless, I can't say that this big adventure instilled confidence, and I can imagine a newbie faced with all this complexity would be reaching for the Windows install disk.
To make a long story short, I learned that in order to set up 3G broadband, you need to create a file named /etc/wvdial.conf. The trick is knowing what to put in that file, so I will include mine below. It will most likely work for you, though possibly you'll need to tweak the settings a bit if your ISP is a little weird. So without further ado:
Modem = /dev/ttyUSB0
Baud = 460800
Init2 = ATZ
Init3 = ATQ0V1E1S0=0&C1&D2S11=55+FCLASS=0
Carrier Check = no
Dial Command = ATDT
Phone = *99#
Username = ppp
Password = ppp
Stupid Mode = yes
Auto Reconnect = yes
Init5 = AT+CGDCONT=1,"IP",""
Phone = *99#
Username = ppp
Password = ppp
Auto Reconnect = yes
Init5 = AT+CGDCONT=1,"IP",""
Init1 = AT+CPIN=
#To force only 2G or 3G, uncomment the Init4 line and append 0 (2G) or 2 (3G), and substitute your operator's name for MYOPS.
#Init4 = AT+COPS=0,0,"MYOPS",
#Init6-Init9 lines are available for user purposes; the commented examples can be used as described:
#To force the 3G quality of service level, uncomment the Init6/Init7 line pair and set value two places each, for 384k/144k/64k, omitting the "k" (e.g., =1,4,64,384,64,384).
#To list all the APNs stored in the modem, uncomment the Init8 line; check the Connection status log for lines beginning with +CGDCONT:.
#To list the operator identifier stored in the modem, uncomment the Init9 line; check the Connection status log for a line beginning with +COPS:.
#Init6 = AT+CGEQMIN=1,4,64,384,64,384
#Init7 = AT+CGEQREQ=1,4,64,384,64,384
#Init8 = AT+CGDCONT?
#Init9 = AT+COPS?
The above file configures PupDial, which is Puppy's graphical front-end for the text-mode wvdial program. You just connect by clicking the "Connect" button, but one thing that PupDial doesn't do is give you feedback. So if you want to be sure that you really did connect, you could either launch a browser (but more on that below), or just try to ping distrowatch.com from the command line:
root@puppypc:~> ping distrowatch.com
The one last connectivity-related thing you ought to do is run the firewall utility from the "Setup --> Linux-Firewall Wizard" menu. This is dead-easy, just accept the defaults. Once set up, you needn't bother with it again. A firewall icon will become visible in the lower-right panel, and if you hold your mouse cursor over it, you should see the words "Firewall On."
Every time you read a review of Puppy Linux, inevitably the reviewer brings up the issue of Puppy's rather unusual user profile, which is to run the desktop and all applications as root (aka the "superuser"). Our intrepid reviewer then points out that this could be a security hole. Just as inevitably, one or more commenters out in Blogland comes riding to the rescue, protesting that Puppy is just as secure as any other Linux distro. "Running as root is safe - millions of users do so without ever getting hacked, so it can't be a security risk," says this voice, followed by: "Why do you reviewers keep whining about this?"
Because it is a security risk. In the next few paragraphs I will whine about this too, just like my predecessors. Feel free to skip ahead if you'd rather not read my whining, though by doing so you'll also miss my suggestions on how to minimize the risk.
So to clarity: when you boot up Puppy, you are not presented with a log-in prompt. Rather, you are logged in automatically as root and no password is requested. In theory, that shouldn't matter on a single-user system. In practice, once you go online, you are no longer running a single-user system - you are on a network, and there are lots of mean, nasty people out there who will employ every dirty trick in the book to break into your machine.
As mentioned, Puppy comes with a firewall, and you should of course be using it. But a firewall won't stop that which you've decided to allow in. Once you connect to a web site and start watching Flash videos, you have poked a hole in your firewall. A well-written web browser should protect you, but browser plug-ins like Adobe Flash are not open-source and have been hit numerous times with zero-day vulnerabilities. Though most Flash exploits target Windows users, there's no reason why Linux can't be targeted as well. The chief defense that Linux has in this case is the system of user privileges (or rather, the lack of privileges granted to non-root users). Some distros employ additional sophisticated defenses such as SELinux or AppArmor, and there is a cool technique called "sandboxing." However, these weapons aren't built into Puppy, and trying to roll-your-own wouldn't be trivial.
The good news is that Puppy comes configured, by default, with one non-privileged user by the name of spot. You can add additional users as well, though there isn't much reason to do so unless you've got two or more people sharing the same computer. Unfortunately, you cannot log into your desktop as spot. Rather, you've got to open a terminal and type at the command line: "su spot." Once you become spot, any command you launch (from the command line) will only have spot's limited privileges. Thus, if spot types "firefox," he/she can browse the Internet in relative safety. There are some caveats: the Chromium browser at present cannot be launched this way in Puppy (it will generate an error message and exit), while some other applications don't work properly (gFTP, for example). Also, when you launch applications as spot, the menus tend to have small and ugly fonts, though this is something I can live with. What I cannot live with is the knowledge that I'm browsing the Internet and checking my email with a system that could possibly be compromised. Security, to me, is a big deal.
Command-line tips and tricks
Although this review is not meant to be a primer on using the command-line interface, I do want to pass along a few tips that are especially relevant to configuring Puppy. If you open a terminal window, the root command prompt is nothing but a pound sign "#", and strangely even "su spot" gives you the same prompt. You aren't informed which directory you're in, and typing the wrong command could "clobber" (overwrite) an important system file, or delete it entirely.
To change all that, fire up Puppy's intuitive graphical Edit program (or non-intuitive vi if you're used to it), and create a file named .bashrc in the /root directory, with this content:
alias rm='rm -i'
alias cp='cp -i'
alias mv='mv -i'
set -o noclobber
Close the terminal window, and open a new one. Now your root prompt should look like this:
And if you type "su spot" you should see this:
As spot, you should also create file .bashrc with the same content as above, but I suggest adding one additional line:
PATH=$PATH:$HOME/program ; export PATH
If you later have any scripts of your own, put them in /root/spot/program.
You've got one more important thing to do. By default, root, spot and any new users you create will use the sh shell, but I'd seriously advise switching this to bash. That's particularly important for spot. To do this, edit file /etc/passwd and change "/bin/sh" to "/bin/bash" for both root and spot. Since you are messing with a crucial system file, before editing I suggest backing it up by typing:
cp /etc/passwd /etc/passwd.original
Care and feeding
Puppy already comes with a decent selection of useful software packages pre-installed. However, everybody wants more, and fortunately it's not difficult to teach this dog some new tricks.
Binary packages (known as "PETs") are readily installed/removed by clicking on the "Quickpet" icon which resides on Puppy's desktop. You'll find all the usual suspects in there, such as GIMP, Firefox and Google Earth (Note: Google Earth installed but wouldn't run). I especially appreciated the inclusion of Emacs, the "Swiss Army Knife" of editors that I'm using right now to type this review. A nice touch is Kompozer, a WYSIWYG tool for simple web site development. Even WINE is included, though I didn't put it to the test since I no longer have any Windows applications. About the only complaint I have is that some of the packages are a bit dated, but they still work and that's what really matters.
Although it's nice to have pets, an interesting new development which began only with the 5.x Lucid releases is the ability to install Ubuntu DEB packages. This is still a work in progress, and many of the packages I tried to install ran into unresolvable dependency issues. Furthermore, the packages on offer are only a subset of the enormous Ubuntu repositories. Nevertheless, this has potential to help our Puppy grow into a full-sized dog.
To set up the Ubuntu repositories (and also update Puppy's pets), start Quickpet, then choose the More Pets --> Puppy Package Manager --> and click the Configure Package Manager button. Select whatever repositories you are interested in, and finally click Update now.
Asian language support
There are packages to support several European languages, but one thing Puppy lacks is any support for the major Asian languages. In fact, it's quite a serious omission for any modern OS now that we have Unicode. If you open a web page at a Chinese web site, all you'll see are square boxes with numbers in them. Fortunately, this can be rectified easily by doing the following:
You have to log out (or better yet, just reboot) for the new font to take effect.
- Download this font: zenhei
- Put that archive file into the /root folder, and unpack it: tar -xvf wqy-zenhei-0.6.26-0.tar.gz
- You'll now have a directory /root/wqy-zenhei, so move to that directory and copy "wqy-zenhei.ttf" to /usr/share/fonts/truetype/ttf-liberation/
- And finally, as root, execute this command: fc-cache -fv
After a full week of usage, I can't say that Puppy Linux 5.2.5 Lucid is quite ready to compete with industrial-strength distros such as Ubuntu, Debian, Fedora or openSUSE. It does come very close and I was able to get most of my work done, but the collection of PET packages is still insufficient to meet my heavy demands. The addition of the Ubuntu repository is potentially a solution, but the package collection is far from complete, and the issue of "dependency hell" is a source of frustration.
Furthermore, the wisdom of running as root continues to haunt Puppy. In this era of online shopping and online banking, users expect ironclad security, and it should not require command-line hacks to get it. Discussion of this issue often gets heated, even rabid, turning into an all-consuming flamefest at times. I wish people wouldn't get so emotional about it, but it is what it is. I don't expect the raging debate to end any time soon.
On the other hand, perhaps I'm barking up the wrong tree. Is Puppy meant to be blockbuster OS, built to withstand attacks like a server farm? Or is it just a lightweight fun OS that we can use to revive old hardware, or run from a USB stick when we need portability? A lot of people like Puppy - it's in the top 10 of the DistroWatch page-hit ranking. I enjoy Puppy too, and it's what I run exclusively on my netbook. Maybe the only thing wrong with Puppy is that users' expectations tend to exceed the developer's intentions.
|Miscellaneous News (by Ladislav Bodnar)
Stefano Zacchiroli re-elected as DPL, HatStacks web-based software portal for Fedora, Incognito and "untrusted websites"
Debian developer Stefano Zacchiroli (pictured on the right), has been elected as Debian Project Leader (DPL) for the second year running: "The winner of the election is Stefano Zacchiroli." Of course, this year's election was about as unexciting as it gets as Zacchiroli was the only candidate. One day before his term expired, the outgoing (and incumbent) DPL wrote on the debian-devel-announce mailing list: "Let's pretend for the rest of this mail that I still don't know what happened in the elections between me and that NOTA bloke. Today is the last day of the current DPL term, so what could possibly be better than SPAM-ing all of you with a report of what happened in DPL land since last month?" The post touches on some interesting subjects, including the Debian dErivatives eXchange (DEX) initiative, upcoming conferences (including DebConf) and the distro's relationship with the GNOME project, Free Software Foundation and the gNewSense distribution.
* * * * *
A useful service designed primarily for Fedora users has been born. HatStacks, a web-based software portal offering a one-click installation method of many popular applications, went live last week: "Welcome to HatStacks: a free, web based software portal for the Fedora, Red Hat, and openSUSE Linux distributions. With HatStacks you can add applications to your myStack, and get recommendations for others via smartStack. HatStacks is partners with our sister project, HumanityStacks, a similar portal for Debian and Ubuntu. You can create an account and even add programs to your myStack in HatStacks, and then go over to HumanityStacks on an Ubuntu computer and install the same programs from your stack in just a few minutes through our private repository of applications. HatStacks was created in January of 2011 by a privately owned, independent FOSS, SAAS firm." A great service for those users who don't like mocking around in the terminal to install packages not normally available in the standard Fedora repository.
* * * * *
Finally, a quick clarification on one of the recently released distribution. As one user noted, "I keep getting 'untrusted website' message from DistroWatch link while trying to access the website of Incognito Live System", a new version of which was released last week. Here is the response from the distro developer (who -- quite naturally -- prefers to remain incognito: "The project that hosts our website prefers not to give any money to the SSL Certification Authorities mafia. I guess the recent Comodo compromise is enough of a proof that the current CA-based trust model is inherently flawed. This webserver's SSL certificate is signed by a non-commercial, cooperative CA called CaCert which is not installed on any major browsers except Debian's Iceweasel. Depending on your security needs, you may thus want to 1 - visit our website without using SSL at all, or 2 - install the CaCert root certificate into your web browser, or 3 - add an exception into your web browser so that it considers our website certificate as valid. On the other hand, we're (sadly) considering offering our web hosters a commercial certificate signed by the SSL mafia. Not that it would make our website more secure at all, but it would at least avoid web browsers to display their "untrusted website" warning, that most visitors (read: anyone who is not that much fond of Internet security issues) have no clue what to do about."
Incognito Live System - browse the Internet in complete anonymity
(full image size: 79kB, resolution 1280x1024 pixels)
|Tips and Tricks (by Jesse Smith)
Compiling the Linux kernel
A few weeks ago we saw the release of the 2.6.38 version of the Linux kernel. Generally I don't find myself all that interested in the minor point releases, but the performances improvements included in this release caught my attention and I decided to try it out. After grabbing the source from kernel.org it occurred to me that since it had been quite some time since I installed a vanilla kernel from source I should check to make sure no changes had made to the process. What I soon found was that the kernel documentation appears to be a bit out of date and sparse. It's generally assumed that people already know the steps and will be running a distribution featuring the LILO bootloader. A quick check also showed that the documentation available on distribution websites tended to be distro-specific (which is natural) but also assumes that we want to use git and the distro's package manager to install the latest kernel.
So, for those mere mortals among us who aren't already familiar with the workings of the kernel and don't want to install a bunch of extra version control and package building tools, I would like to present a step-by-step guide for compiling and installing the Linux kernel. And I'll try to make it as distro neutral as possible.
The first thing I recommend doing is making backups of your data. The kernel is an essential, low-level part of the operating system and making changes to it can cause problems. It probably won't break, but better safe than sorry. After you're done making backups, you'll need to make sure you have the following tools installed: your build system, including the GNU Compiler Collection (GCC). Some distributions refer to these packages as "build-essentials". And you'll need either mkinitramfs or mkinitrd, depending on your distribution. Each of the above should be available in your distribution's repository.
Next you'll want to get the kernel source code, which for the 2.6.38 release is available here. Other releases can be found at kernel.org. For the remainder of my example, I'm going to assume we're building kernel 2.6.38 and the kernel that's currently running on our system is 2.6.32, please adjust version numbers to match your situation. If you're unsure what kernel you're currently running, you can find out by using the command:
Once the new kernel package has downloaded, open a terminal and unpack the source code:
tar xjf linux-2.6.38.tar.bz2
Move into the source code's directory:
The next step you'll probably want to do is grab your distribution's current kernel configuration file. This will make sure the new kernel you build has the same settings as the one you already have. The old config file is probably kept in your system's /boot folder and will have a name like config-2.6.32. We're going to copy that file into the kernel's source directory:
cp /boot/config-2.6.32 .config
We'll then update the configuration file with any new features that have been added. We can do this with the command:
If you're jumping a few kernel versions you'll likely be asked a lot of questions here. It's typically safe to take the defaults and just press Enter at each prompt. Our next step is to compile the kernel. We do this by running:
The compile process will take quite some time, probably in the range of an hour. When the compiling is finally finished we'll want to install the new kernel and its modules. We do this with:
make install modules_install
Our next step is to create an initial RAM disk. Depending on which distro you're on this may be done in one of two ways. Modern distros tend to use a tool called mkinitramfs. If your system uses mkinitramfs, we can make the RAM disk with this command:
mkinitramfs -o initrd.img-2.6.38 -v 2.6.38
Other distributions may use mkinitrd, in which case we can use the command:
mkinitrd initrd.img-2.6.38 2.6.38
Once the RAM disk has been created, we then copy it into our /boot directory:
cp initrd.img-2.6.38 /boot
Our last step is to update our boot loader so the new kernel will appear as an option at boot time. On machines using the GRUB boot loader, we can run the following as root:
If you're on a distro which still uses the LILO boot loader, then we need to update LILO's configuration file (usually /etc/lilo.conf) and re-run LILO. There's a tutorial showing the steps on this page.
The next time you reboot the machine, the new kernel will be available in the boot menu.
As I said at the beginning of this piece I was curious to see what sort of improvements were in this release of the kernel. I did find my desktop was slightly more responsive. I tend not to run a lot of intensive tasks at once, so there wasn't much there to improve. I did find my machine woke up from sleep mode and re-connected to the network faster than before and, though I haven't done a strict measurement, I think boot time has improved. With these improvements I was surprised to find my video card's performance had dropped off significantly, making videos choppy and some parts of the screen not display properly. Apparently I wasn't the only one. Have you tried the latest kernel? What were your impressions?
|Released Last Week
Parted Magic 6.0
Patrick Verner has announced the release of Parted Magic 6.0, a specialist live CD designed for disk management and data rescue tasks: "Parted Magic 6.0. If you have experienced booting issues with Parted Magic, this is the version you have been waiting for. The way the kernel is handled has been completely redone. This is the reason for the new major version number. The kernel modules, udev, and firmware have been moved to the initramfs. The nice graphical boot menu that we have been using for years has been removed in favor of a very basic one. Many laptops and notebooks could not start the complex menu. A large number of major and minor bugs have been fixed as well. Updated programs: LVM 2.02.84, util-linux 2.19, Linux kernel 126.96.36.199, udev 165, glibc 2.13, xfsprogs 3.1.4, BusyBox 1.18.4, Memtest86 4.20, NTFS-3G 2011.4.12..." Visit the project's news page to read the release announcement.
Epidemic GNU/Linux 3.2
Epidemic GNU/Linux 3.2, a Brazilian desktop distribution based on Debian's "testing" branch, has been released. New features in this version include: eMorph - a new utility which serves as a second system installation step and which allows users to install or remove selected sets of programs, extending or reducing the functionality of the system with just a few mouse clicks; eUpgrade - a new tool which makes it easy to upgrade the distribution to a newer version from the comfort of a graphical application; ePendrive - a utility that allows the user to save changes made to the distribution while running it from a USB storage device; improved, beginner-friendly installer written in C++ and Qt.... Read the detailed release announcement (in Portuguese) to find out more about the release.
Epidemic GNU/Linux 3.2 - a Debian-based desktop distribution with KDE from Brazil
(full image size: 984kB, resolution 1280x1024 pixels)
DEFT Linux 6.1
Stefano Fratepietro has announced the release of DEFT Linux 6.1, a customised distribution of the Ubuntu live CD containing some of the best open-source applications dedicated to incident response and computer forensics: "DEFT Linux 6.1 is ready for download. DEFT Linux 6.1 is the last planned release of the DEFT 6 series. From June 2011 we will start working on version 7. It will feature great improvements of both the architectural structure and the included applications. Release notes: start faster by 15% over the previous version; optimization of initrd; RegTime.py and Recovery.py. Fixed problem of large pcap file uploads in Xplico. Revision of all DEFT extras tools to comply with their licenses. DEFT 6 can boot from USB drives." Here is the brief release announcement.
Incognito Live System 0.7
Incognito Live System is a Debian-based live CD offering complete Internet anonymity for the user. Version 0.7 was released today and is available for free download. What's new? "Tor 0.2.1.30; protecting against memory recovery - new, safer way to wipe memory on shutdown which is now also used when the boot media is physically removed; hardware support - install more printer drivers, support mobile broadband devices such as 3G USB dongles, install Atheros and Broadcom firmware; Iceweasel - install the HTTPS Everywhere extension, many Anonymity Set preservation enhancements, mostly inspired by the Tor Browser Bundle configuration; user-friendly encryption support; add opt-in i2p support with Iceweasel integration through FoxyProxy...." Read the detailed changelog for a full list of new features.
Carsten Schöne has announced the release of StressLinux 0.7.105, an openSUSE-based distribution dedicated to users who want to test their systems on high load and to monitor the health of these systems: "A new StressLinux release (0.7.105) is ready for download. The base system is now openSUSE 11.4 with updated network card drivers for r8101, r8168 and r8169. StressLinux specific packages are updated as well, including BusyBox, iperf, lm_sensors, lshw, Memtest86, Memtest86+, mprime, smartmontools (svn r3314), x86info and y-cruncher. There is one known issue, Memtest86+ is not working from within the ISO images. This seems to be an issue between the new package and the SUSE Studio build system and will be fixed in a later release..." Visit the project's home page to read the brief release announcement.
* * * * *
Development, unannounced and minor bug-fix releases
- Kongoni GNU/Linux 2011-beta2, the release announcement
- FreeNAS 8.0-rc5, the release announcement
- Chakra GNU/Linux 2011.04-ms5, the release announcement
- Ubuntu, Kubuntu, Xubuntu, Edubuntu, Ubuntu Studio, Mythbuntu 11.04-beta2, the release announcement
- Clonezilla 1.2.8-26
- BlankOn Linux 7.0-alpha4, 7.0-alpha5
- Estrella Roja 11.04-rc1
- OpenFiler 2.99
- Netrunner 3
- Scientific Linux 4.9-rc1
- PC-BSD Current-20110414
- Sabily 11.04-beta
- RIPLinuX 11.9
|Upcoming Releases and Announcements
Summary of expected upcoming releases
New distributions added to waiting list
- LDR. LDR (Linux Done Right) is an Arch-based Linux distribution which has many software components pre-configured.
- PLATYPUX. PLATYPUX, built from Linux From Scratch, is an easy-to-use French Linux distribution featuring the Openbox window manager.
* * * * *
DistroWatch database summary
* * * * *
This concludes this week's issue of DistroWatch Weekly. The next instalment will be published on Monday, 25 April 2011.
Robert Storey, Ladislav Bodnar and Jesse Smith
If you've enjoyed this week's issue of DistroWatch Weekly, please consider sending us a tip.
(Tips this week: 0, value: US$0.00)
|• Issue 690 (2016-12-05): Fedora 25, Ubuntu adopts rolling HWE kernel, running Android apps on GNU/Linux, Haiku working toward EFI support|
|• Issue 689 (2016-11-28): openSUSE 42.2, Fedora's upgrade path, plans for Korora 25, transitioning from PC-BSD to TrueOS, Webconverger's reproducible builds|
|• Issue 688 (2016-11-21): Endless OS 3.0.5, KDE neon fixes security hole, FreeBSD's Quarterly Status Report, Rolling release trial #2 concludes|
|• Issue 687 (2016-11-14): NAS4Free 10.3.0.3, Fedora gains MP3 playback, budgie-remix becomes Ubuntu Budgie, Ubuntu flavours compared, Rolling release trial #2|
|• Issue 686 (2016-11-07): FreeBSD 11.0, rolling release trial #2, Debian announces supported architectures, Simplicity switching to antiX base, farewell to Mythbuntu|
|• Issue 685 (2016-10-31): elementary OS 0.4, SUSE gains ARM support, Mint improves language support, Dirty COW explained, Rolling release trial #2|
|• Issue 684 (2016-10-24): Ubuntu 16.10, Linux popularity in different markets, Fedora runs on Raspberry Pi, Ubuntu features live kernel patching|
|• Issue 683 (2016-10-17): Refracta 8.0, making packages for distributions, Alpine switches to LibreSSL, 386BSD website publishes classic code|
|• Issue 682 (2016-10-10): KDE neon 20160915, Android-x86 6.0, Fedora warns of update bug, HandyLinux drops English translation, LXQt benchmarks|
|• Issue 681 (2016-10-03): OpenBSD 6.0, DragonFly BSD to support LibreSSL in ports, systemd denial of service bug, upgraded Mintbox Mini|
|• Issue 680 (2016-09-26): Uruk GNU/Linux 1.0, blocking applications at the firewall, Lenovo controversy, Ubuntu running on the Nextcloud Box|
|• Issue 679 (2016-09-19): OpenMandriva 3.0, 32-bit vs 64-bit performance, openSUSE updates, KaOS unveils first run wizard|
|• Issue 678 (2016-09-12): Apricity 07.2016, Mageia adopts DNF, KDE neon to use Wayland, FreeBSD updates Linux compatibility, creating cron jobs|
|• Issue 677 (2016-09-05): Peppermint OS 7, Manjaro updates leadership, TrueOS becomes rolling release, organizing files, creating torrents|
|• Issue 676 (2016-08-29): Korora 24, Fedora 25 to use Wayland by default, Linux turns 25, PC-BSD becomes TrueOS, finding software licensing information|
|• Issue 675 (2016-08-22): Gentoo LiveDVD "Choice Edition", moreutils, Ubuntu improves terminal convergence, MATE packaged for Openindiana, FreeBSD improves video support|
|• Issue 674 (2016-08-15): Zenwalk Linux 8.0, Ubuntu phone follow-up, Lubuntu transitioning to LXQt, Steam running on FreeBSD|
|• Issue 673 (2016-08-03): noop linux and EasyNAS, Debian's GnuPG switch, Fedora "Flock", using "nice"|
|• Issue 672 (2016-08-01): Ubuntu Phone 15.04, Solus embraces rolling release model, interview with Jane Silber, FreeBSD Quarterly Report|
|• Issue 671 (2016-07-25): Slackware 14.2, Point Linux 3.2, OpenBSD disables usermount, KaOS releases significant changes, Fedora 22 reaches end of life.|
|• Issue 670 (2016-07-18): Linux Lite 3.0, Bodhi team plans 4.0.0, pfSense changes licensing, running software across distributions, Linux Mint upgrade path|
|• Issue 669 (2016-07-11): Linux Mint 18, proving a system is secure, LibreSSL in FreeBSD, Ubuntu plans phasing out 32-bit, pfSense status report|
|• Issue 668 (2016-07-04): Fedora 24, Linux Mint plans for 18.1, FreeBSD and DragonFly BSD improve their file systems, comparing Flatpak, Snap and AppImage|
|• Issue 667 (2016-06-27): GeckoLinux 421, Fedora supports Flatpak, Solus unveils new features, running GNU/Linux on tablets|
|• Issue 666 (2016-06-20): Comparing more live update methods, Ubuntu's snap packages, Antergos drops 32-bit media, GeckoLinux unveils Rolling edition, learning Linux resources|
|• Issue 665 (2016-06-13): BunsenLabs Linux Hydrogen, Fedora 24 delayed, NetBSD grows in size, Clonezilla questions|
|• Issue 664 (2016-06-06): Sabayon 16.05, Debian updates install media, the cost of free software, Qubes explains secure build process|
|• Issue 663 (2016-05-30): Comparing live update methods, Ubuntu MATE's progress, distros debate systemd change, DistroWatch turns 15|
|• Issue 662 (2016-05-23): Clonezilla Live, new Fedora community repository, DragonFlyBSD runs Wayland, a live edition of Slackware and kernel components|
|• Issue 661 (2016-05-16): FreeBSD 10.3, OpenMandriva adopts Clang, Debian adds ZFS packages, PCLinuxOS drops 32-bit and comparing CentOS with RHEL|
|• Issue 660 (2016-05-09): Ubuntu MATE 16.04, Mint's xapps, FreeBSD Quarterly Report, Debian updates 32-bit support, addressing GPL violations|
|• Issue 659 (2016-05-02): Ubuntu 16.04, compiling custom kernels, Cinnamon 3.0, Sabayon launches ARM build, Devuan ships Beta release|
|• Issue 658 (2016-04-25): Kali Linux 2016.1, elementary OS 0.3.2, Debian elects Project Leader, Fedora 24 feature preview, Nard reaches 1.0|
|• Issue 657 (2016-04-18): Redox, Linux Mint improves update manager, planned Fedora 24 features, Ubuntu 16.04 getting Snappy packages|
|• Issue 656 (2016-04-11): Qubes OS 3.1, Whonix offers bug bounties, Puppy's family tree, setting up disk partitions and running bash on Windows|
|• Issue 655 (2016-04-04): Parsix 8.5, Sabayon's Community repository, Red Hat offers free subscriptions, Ubuntu tablets, command line tips|
|• Issue 654 (2016-03-28): PCLinuxOS 2016.03, Using signatures to create a web of trust, Arch Linux rolls out Pacman update, GuixSD packages GNOME|
|• Issue 653 (2016-03-21): Antergos 2016.02.21, Debian prepares for election, a Unix-like OS written in Rust, watching Netflix on FreeBSD|
|• Issue 652 (2016-03-14): ReactOS 0.4.0, Debian swaps Iceweasel for Firefox, Fedora moving forward with Wayland, Verifying ISO files|
|• Issue 651 (2016-03-07): Korora 23, Linux Mint improves security, Ubuntu MATE on Raspberry Pi 3 computers, trying different file systems|
|• Issue 650 (2016-02-29): Haiku in 2016, running Android apps on GNU/Linux, 30 years of MINIX, Fedora plans Atomic Workstation|
|• Issue 649 (2016-02-22): Zorin OS 11, openSUSE launches new editions, Linux Mint website compromised, sandboxing applications using Firejail|
|• Issue 648 (2016-02-15): XStream Desktop 153, Raspbian unveils OpenGL feature, free hardware, Ikey Doherty talks desktop design|
|• Issue 647 (2016-02-08): Tails 2.0, KDE project launches Neon, Manjaro unveils ARM support, FreeBSD's quarterly report|
|• Issue 646 (2016-02-01): deepin 15, Mint plans X-Apps, FreeBSD to support boot environments, logging into the desktop as root|
|• Issue 645 (2016-01-25): Linux Mint 17.3 "Xfce", Chromixium changes its name, Ubuntu tablets coming soon, Linux vs BSD comparision|
|• Issue 644 (2016-01-18): Kwort 4.3, Sabayon tests ARM images, Slackware adopts PulseAudio, running Linux without GNU software|
|• Issue 643 (2016-01-11): Solus 1.0, Mint provide upgrade path to 17.3, Fedora developers work on stability, running the LXQt desktop|
|• Issue 642 (2016-01-04): paldo GNU/Linux, vetting distro repositories, Fedora plans to adopt GCC 6, Ian Murdock passes|
|• Issue 641 (2015-12-21): Arch Linux, Qubes OS to ship on Librem laptops, ALT offers start kit images, the spread of systemd and launchd|
|• Issue 640 (2015-12-14): Chakra GNU/Linux 2015.11, removing meta-data from files, Ubuntu to remove on-line dash searches|
|• Issue 639 (2015-12-07): OpenBSD 5.8, openSUSE gathers Summer of Code proposals, running WINE on a live disc, Enlightenment adds Wayland support|
|• Issue 638 (2015-11-30): Qubes OS 3.0, KaOS with Plasma, NetBSD 7.0, Fedora seeks Wayland testers, scheduling tasks|
|• Full list of all issues|